On Jul 23, 2019/By Fori Automation, LLC/In Module Alignment
The automated dynamic alignment cell is a drive through system that adjusts Camber and Toe. The Fori module aligner handles (2) vehicle models that have different geometry.
Providing customized equipment such as this starts with a concept design phase. Fori Germany was requested to complete a thorough engineering review in order to accommodate the rear axle assembly of the (3) vehicles.
A challenging portion to any project is the ability to debug and tryout the process. This project had limited time of debug. The key to success was analyzing every failure mode with precision in order to correct and provide results that would normally require more debug time.
The system was comprised of an axle gripping unit that is used for locating and lifting the axle. An alignment unit is also utilized in order to increase repetition. The adjustment and torque is completed with SEW drives and a special gear head.
This new drive alignment cell was integrated during the 3rd quarter of 2017. Initial production started during December of 2017.
For more information about Fori Automation's module assembly products, please visit our website. |
On Jul 9, 2019/By Fori Automation, LLC/In Chassis Marriage, Fori China
Fori China recently designed, built and integrated a Chassis Marriage system for a Germany Plant.
https://www.youtube.com/watch?v=YPEvwHyMXD0
Features:
- 80 jobs per hour (JPH)
- Increased production rate
- Reduced labor
- Decreased injury concerns
Fori China was responsible for supplying the Chassis Marriage Rail Guided Vehicles (RGVs), associated track, overhead loader and PLC control system that controls the loop.
The Chassis Marriage RGVs are based on Fori’s long standing design and architecture. Each RGV includes two Fori patented servo controlled chain lifts for the synchronized lift and locate of the front and rear pallet.
The Fori RGV is focused on maintainability and simplicity for the end user. The system has been a robust solution for many years, pushing Fori to become a leader in Chassis Marriage systems.
The integrated system was a great success for the end user. Installation was completed during the 3rd quarter of 2017, with initial production beginning in August of 2017.
For more information about Fori Automation's body and chassis marriage products, please visit our website. |
