RBT Modification kits with latest Emerson M Series Drive Controllers for improved torque measurement and control of test processes.
Modifications were requested for two existing Fori Roll and Brake testers to accommodate a new vehicle model “9-Speed Transmission Test Process”. The transmission features an increase in torque and acceleration. This required new servo motors and controllers that could accommodate the torque and acceleration throughout the test process.
Upon installation of the servomotor and drive kits, software was provided for the new transmission test process. The package included test curve displays, revised test screens, parameter selection menus and other enhancements for “Roll and Brake” test processes.
The new test screens displayed to the operator resulted in a very precise means of conducting the test process. Results of the test proved to be within the expected design criterion for the new 9-speed transmission.
The two systems were modified during a shutdown period and restart of production for existing and new product was made successfully.
Fori China designed, built and integrated an end of line testing system for an automotive manufacturer.
Features:
Jobs Per Hour: 65 jobs
Testing Completed:wheel alignment, headlamp aiming, roll and brake
Results: Increased production rate, reduced labor, improved quality
https://www.youtube.com/watch?v=uO3VIb39Ubc&t
The end of line testing system included: non-contact wheel alignment, automatic headlamp aiming and roll and brake testing.
The wheel alignment machine is designed for automatic measuring and manual adjustment of the vehicle parameters. The system was designed to measure toe and camber. The system is designed for a wide range of wheel bases and wheel tread width and tire sizes.
An integrated headlamp aimer measures the vehicle headlight intensity and position automatically and guide the operator to adjust the lamp position semi-automated. The “Fori Vision” aiming unit utilizes a camera based system to measure the intensity and position of the headlight.
Roll and brake testing is also completed on the end of line system, which includes testing for acceleration, cruise control, transmission, rear gear, dynamic braking and engine.
For more information about Fori Automation's end of line testing solutions, please visit our website.
Fori China recently designed, built and integrated an end of line system for an automotive manufacturer.
Features:
Jobs Per Hour: 15 jobs
Testing Completed: Wheel alignment, headlamp aiming, roll and brake
Results: Increased production rate, reduced labor, improved quality
The end of line system was included: non-contact wheel alignment, automatic headlamp aiming, and roll and brake testing.
The Wheel Alignment machine is designed for automatic measuring and manual adjustment of the vehicle parameters. The system was designed to measure Toe & Camber with a wide range of wheel bases, tread width, and tire sizes.
An integrated headlamp aimer measures the vehicle headlight intensity and position automatically and guides the operator to adjust the lamp position semi-automated. The “Fori Vision” aiming unit utilizes a camera based system to measure the intensity and position of the headlight.
Roll and brake testing is also completed on the end of line system, which includes testing for acceleration, cruise control, transmission, rear gear, dynamic braking and engine.
For more information about Fori Automation's end of line systems, please visit our website.